Umatshini ophakathi ophakathi (nge-wipilator)
Iimpawu zeMveliso
● Umatshini udityaniswe nomatshini wokutshata kunye ne-wimililator yokuguqulela ngokuzenzekelayo. Ukwandiswa kwangaphakathi, ukuphuma kwendawo yoyilo lokuphela koxinzelelo lokuphela koxinzelelo.
● Ilawulwa nguMlawuli oPhakamileyo weMizi-mveliso iPlC; Ukufaka umlo wezodwa kwi-slot nganye ukucwangcisa ucingo olungenanto kwaye lubhabha; Ukuthintela ngempumelelo i-wire ye-ensule of isuka, ezantsi kwephepha le-slot lisuka kwi-Coldels kunye nomonakalo; ngempumelelo qinisekisa ukuba i-stator ngaphambi kokubopha ubungakanani obuhle.
● Ukuphakama kwephakheji yocingo kunokuhlengahlengiswa ngokweyona meko.
● Umatshini wamkela i-Fold Heaction Tshintsha uyilo; Ukutshintsha kokutshintsha kuyakhawuleza kwaye kufanelekile.
I-parameter yemveliso
| Inombolo yemveliso | I-ZDZX-150 |
| Inani leentloko zokusebenza | I-1PCS |
| Isikhululo sokusebenza | Isikhululo esi-1 |
| Qhelanisa ne-wire ye-wire | I-0.17-1.22MM |
| I-Magnet Dires | I-Word Wirer wire / i-Aluminium Wire / i-Copper Clad i-Aluminum wire |
| Qhelisela kwi-stator star | I-20mm-150mm |
| Ubuncinci be-stator engaphakathi | I-30mm |
| Ubuninzi beetator zangaphakathi | I-100mm |
| Uxinzelelo lomoya | I-0.6-0.8MPA |
| Ukunikezwa Amandla | I-220v 50 / 60hz (iSigaba esinye) |
| Amandla | 4kw |
| Ubunzima | I-1500kg |
| Ubukhulu | (L) 2600 * (W) 1175 * (h) 2445mm |
Ulwakhiwo
I-1. Ukuqwalaselwa kubalulekile
-Umqhubi kufuneka abe nolwazi olupheleleyo ngomatshini womatshini, ukusebenza kunye nokusetyenziswa.
-Umntu ongagunyaziswanga akavumelekanga ngokungqongqo ekusebenziseni umatshini.
-Umatshini kufuneka uhlengahlengiswe ngalo lonke ixesha ipakishwe.
-Umsebenzi akathintelwa ukushiya umatshini ngelixa isebenza.
2. Ukulungiselela ngaphambi kokuqala umsebenzi
-Coca indawo yokusebenza kwaye usebenzise igrisi yokuthambisa.
- Vula amandla kwaye uqinisekise ukuba ukukhanya kwesibonakaliso samandla sivuliwe.
3. Inkqubo yokusebenza
Jonga indlela yokujikeleza kwemoto.
-Fumisa i-stator kwi-fitmere kwaye ucinezele iqhosha lokuqalisa:
A. Beka i-stator ukuba ifakwe kwi-fectre.
B. Cinezela iqhosha lokuqala.
C. Qinisekisa ukuba i-sub ye-SPER ikwindawo.
D. Qala inkqubo yokulungisa.
E. Thatha i-stator emva kokubumba.
I-4. Ukuvalwa kunye nokugcinwa
-Indawo yokusebenza kufuneka igcinwe icocekile, kunye namaqondo obushushu angadlulanga i-35 dempreus Celsius kwaye afune umswakama phakathi kwe-35% -85%. Indawo kufuneka ikhululeke kwigesi yobuthathaka.
-Umatshini kufuneka ogcinwe uthuli-ubungqina kunye nobungqina bokufuma, ukuba uphume kwinkonzo.
-Ukuyitha inyama kufuneka kongezwe kwindawo nganye ye-blipricenti ngaphambi kwayo yonke i-Shift.
-Umatshini kufuneka ugcinwe kude kwimithombo yothuke kunye nentshukumo.
-Umgangatho weplastiki weplastiki kufuneka ucoceke ngalo lonke ixesha kwaye amabala omhlwa awavumelekanga. Isixhobo somatshini kunye nendawo yokusebenza kufuneka icocwe emva kokusetyenziswa.
-Ibhokisi yolawulo lombane kufuneka ihlolwe kwaye icocwe rhoqo kwiinyanga ezintathu.
I-5. Ukucamngca
Jonga indawo ye-filtution kwaye uhlengahlengise ukuba i-stator icinyiwe okanye ingagungqi.
-Misa umatshini ukuba imoto ijikeleze kwicala elingalunganga, kwaye itshintshe imithombo yombane.
-Idilesi yedilesi ephakamayo ngaphambi kokusebenza ngomatshini womatshini.
I-6. Amanyathelo okhuseleko
-Xithwa igiya efanelekileyo yokukhusela efana neigloves, amagqabi, kunye neendlebe ukuphepha ukwenzakala.
Jonga utshintsho lwamandla kunye nendawo yokumisa ngokukhawuleza ngaphambi kokuqala umatshini.
-Angafikeleli kwindawo yokubumba ngelixa umatshini uyasebenza.
-Ngaba ungoyiki okanye ulungise umatshini ngaphandle kokuba ugunyaziso.
-Ukuba izitayile ngononophelo ukuthintela ukulimala kwimiphetho ebukhali.
- Kwimeko yongxamiseko, cofa i-switch yendawo yokumisa ngokukhawuleza kwaye emva koko ujongane nemeko.
